Specs - page 2 of 3

Operator Controls

• Vacuum on/off by RF 433Mhz remote control
• Heaters on/off by RF 433Mhz remote control (heated version only)
• On/off functions have a manual override switch and can be switched on/off by a remote computer via an Optically Isolated Host I/O interface (heated version only)
• Clearly visible, 360° around controller console, High Intensity status LEDs (heated version only)

Electrical

• Controller Supply Voltage 400+0+Ground [50/60Hz] V(AC)
• To be fused with external fuses of 3x32 Amp
• Max. Power Load 6.8 kW (heated version only)
• Console power cable of 6 meters with wander plugs included
• Pre-wired pump

Operating Conditions

• Temperature 18 – 35 ˚C
• Relative Humidity 30-90 %
• Noise 70 dB(A) ****

**** with included silencer and depending on covering of tray with media and physical mounting/location of vacuum pump